EKF CompactPCI CPU Boards: CCG-RUMBA Core ™ 2 Duo

CCG-RUMBA

3U, High Performance CompactPCI ^® CPU Board

CompactPCI ^® Express System Slot Sideboard Option

Description

CCG Product Information
CCG User Guide
CCE Expansion Board
CCH Expansion Board
CCI Expansion Board
CCJ Expansion Board
CCK Expansion Board
CCL Expansion Board
C23 Expansion Board
Expansion Board Comparison
CCT Rear I/O Module

BIOS Update
Graphics Driver
Embedded Graphics Driver
Ethernet Driver ETH1 (82566)
Ethernet Driver ETH2 (82573)
Chipset Software
Matrix Storage Manager
Turbo Memory Driver
SATA Driver (C23/JMB363)
SMB Monitor (EXE)
SMB INI Files for CCG

E-Mail on BIOS Update
E-Mail bei BIOS Update

Photos
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14
Print Quality 300dpi 10x15cm .JPG ©EKF

CCG-RUMBA

High Performance CompactPCI ^® CPU

Scalable from 1.06GHz Ultra Low Voltage Core™ 2 Duo to 2.2GHz Core™ 2 Duo
Dual-Screen Digital Video • Dual Gigabit Ethernet • 4GB Dual-Channel Memory • Triple SATA 3Gbps
CompactPCI ^® Express System Slot Sideboard Option

The CCG-RUMBA is a versatile 4HP/3U (single size Eurocard) CompactPCI® CPU board, equipped with an Intel® Core™ 2 Duo processor at 2.2GHz clock, and up to 4GB dual channel capable DDR2 RAM. Three Serial ATA channels are available for rear I/O. The CCG-RUMBA has been designed especially for systems which require high performance at moderate power consumption.

The chipset is based on PCI Express technology and has a powerful dual-screen integrated graphics accelerator. Two Gigabit Ethernet controllers are provided for high speed connectivity. As an option, a mezzanine card is available that allows to use the CCG-RUMBA in addition as CompactPCI® Express system slot controller (especially suited for hybrid dual backplane systems).

CCG-RUMBA - Rugged High Performance

The CCG-RUMBA is provided with a high performance mobile chipset (Intel® GME965) which operates at up to 800MHz FSB and up to 667MHz DDR2 memory clock for optimum system throughput. The on-board CF connector module (C10-CFA) can accommodate a CompactFlash memory card. As an alternate, a 1.8-inch HDD/SSD disk module (C30-PATA) is available as on-board mass-storage device (option).

Local expansion interface connectors can be optionally used to directly attach a mezzanine companion side board, either for audio- and legacy support, or equipped with PCI Express based I/O circuitry. Mezzanine cards (aka side boards) can carry in addition a 2.5-inch hard disk drive. Also as an option, a suitable rear I/O transition module (CCT-RIO) is available to the CCG-RUMBA, which e.g. provides the Serial ATA connectors.

CCG-RUMBA w C30-PATA 1.8-Inch HDD/SSD

Benefits of the CCG-RUMBA

CompactPCI System Slot Controller with or w/o Rear I/O
CompactPCI Express System Board Option (Mezzanine Expansion Card)
Hybrid Systems Option (Dual Backplane CompactPCI & CompactPCI Express)
Intel® Core™ 2 Duo Mobile Processor 2.2GHz (FSB 800MHz)
PCI Express Mobile Chipset Intel® GME965
2 x 2GB DDR2 Memory (Dual Channel Mode Capable)
Dual-Screen Graphics Controller
Dual Gigabit Ethernet Controllers
Triple SATA 3Gbps, Intel® Matrix Raid Storage Technology
Seven USB 2.0 channels
On-Board CompactFlash or on-Board 1.8-Inch Flash Disk
Variety of Mezzanine Expansion Boards Available with and w/o PCIe
TPM 1.2 Option (on Mezzanine Expansion Board)
Rear I/O Transition Module Option
Intel® AMT 2.0 Platform Management
RoHS compliant

CCG-RUMBA Block Diagram

CCG-RUMBA Component Assembly (Top View)

Feature Summary CCG-RUMBA
Form Factor	Single size CompactPCI style Eurocard (160x100mm²), front panel width 4HP (20.3mm)
Processor	Designed for Intel® Core™ 2 Duo second generation dual core mobile processors (codename Merom), dynamic FSB switching, 800/667/533MHz FSB, maximum junction temperature 100°C, Intel® Core Multiprocessing (CMP), Intel® Virtualization Technology (VT), Intel® 64 Architecture CCG-1-RUMBA: 1.06GHz U7500 Intel® Core™ 2 Duo ULV, 533MHz FSB, 2MB L2 cache, TDP ~10W (low power applications) CCG-2-RUMBA: 1.2GHz U7600 Intel® Core™ 2 Duo ULV, 533MHz FSB, 2MB L2 cache, TDP ~10W (low power applications) CCG-4-RUMBA: 1.6GHz L7500 Intel® Core™ 2 Duo LV, 800MHz FSB, 4MB L2 cache, TDP 17W (general purpose applications) CCG-6-RUMBA: 2.0GHz Intel® Celeron® M 550, 533MHz FSB, 1MB L2 cache, TDP 27W (value applications, single core) CCG-8-RUMBA: 2.2GHz T7500 Intel® Core™ 2 Duo, 800MHz FSB, 4MB L2 cache, TDP 35W (performance applications)
Chipset	Intel® GME965 (Codename Crestline) chipset comprised of of: GME965 Graphics/Memory Controller Hub (GMCH) with Intel® Graphics Media Accelerator (GMA), dual independent display, DirectX 10 and OpenGL 2.0 support, generation 4 graphics core, 1.5 x 945GM graphics performance, iAMT manageability engine ICH8M-E Enhanced I/O Controller Hub, integrated GbE MAC, dual USB EHCI controllers (no shared bandwidth), 3 x SATA 3Gbps, MST & RAID, iAMT, unified SPI Flash support
Memory	Dual 200-pin SO-DIMM socket, DDR2 667 SDRAM (PC5300), 4GB (2 x 2GB) maximum, single or dual channel mode operation, configurations: 256Mb, 512Mb, 1Gb, 2Gb technologies for x8 and x16 devices Dual channel symmetric - memory addresses interleaved for increased performance, but memory module sizes must match Intel® Flex Memory Technology (dual channel interleaved mode with unequal memory population) - memory module sizes maybe unequal in both the channels Dual channel asymmetric - memory module sizes may differ, including no memory in the second channel (single-channel) Channel 0 must be populated first
Non Volatile Memory (NVM)	Intel® Turbo Memory card (codename Robson) on CCI-RAP mezzanine side board optionally available PCI Express Mini Card 1G Byte Flash Microsoft® ReadyDrive and ReadyBoost (Windows® Vista) Intel® Turbo Memory driver
Video I/O	Analog monitor and digital flat-panel display support by DVI-I connector (front panel), up to QXGA 2048x1536 pixel 16M colours @75Hz refresh rate (analog), up to 1600 x 1200 pixel 16M colours @60Hz (digital), incorporates PanelLink Digital technology (Silicon Image). Dual screen capable 2 x 1600 x 1200 pixel (one display attached to the front panel, the other to the back panel, or both to the front panel by means of a DVI-I to DVI-D/VGA splitter cable, or secondary DVI-D connector on mezzanine sideboard) Front panel option: D-Sub (female HD15) VGA connector available, replaces DVI-I connector Rear I/O option: Analog video across J2/P2 (CCT-RIO rear I/O transition module) Mezzanine option: Secondary DVI-D connector at mezzanine card front panel allows for dual digital flat panel operation, suitable mezzanine modules e.g. CCH-MARIACHI, CCI-RAP or CCJ-RHYTHM
USB I/O	All ports over-current protected, data transfer rate of up to 480Mbps, conforming to USB2.0 2 x USB type A connector (front panel) 3 x USB J2/P2 Rear I/O option (CCT-RIO rear I/O transition module) 2 x USB ports expansion interface option (in use by several mezzanine side boards) USB Flash drive module C15-DON option (USB stick on-board) Dual EHCI / five UHCI controllers provided by ICH8M-E
Ethernet I/O	Two 10/100/1000Mbps Gigabit Ethernet controller, accessible via RJ45 jacks from the front panel ETH1 equipped with Intel® 82566 PHY (codename Nineveh), serves also as AMT out of band communication path (MAC provided by ICH8M-E), no Jumbo Frame support with 82566MM ETH2 equipped with Intel® 82573 GbE controller connected to local PCIe lane, Jumbo Frame support with 82573L up to 9kB Option ETH1 Gigabit Ethernet configurable (BIOS setup) across J2/P2 with attached CCT-RIO rear I/O transition module
PATA (IDE)	Ultra ATA/100 connector, handover to CCE-PUNK/CCH-MARIACHI/CCJ-RHYTHM mezzanine expansion board with optional on board 2.5-inch hard disk drive or external device CompactFlash socket C10-CFA supplied for a CFA ATA memory card or Microdrive® Option 1.8-inch on-board Flash disk module C30-PATA, replaces CompactFlash facility
SATA (Serial ATA)	Triple-channel Serial ATA 3Gbps available for J2/P2 rear I/O option Suitable rear I/O transition module CCT-RIO (2 x system-internal SATA, 1 x eSATA for attachment of external devices) Intel® Matrix Storage Technology MST (Raid 1, 0, Matrix Raid)
PCI Express	4-Lane PCIe (1 Link) connector for CCJ-RHYTHM and other mezzanine expansion cards (side boards)
Mezzanine Side Board I/O	LPC/USB/Audio (Super-I/O, USB and Azalia HD Audio) expansion interface connector ATA/IDE expansion connector PCI Express 4-lane (configurable as 1 link x 4) high speed expansion connector SDVO secondary digital graphics port high speed expansion connector Suitable mezzanine companion boards available: CCE-PUNK: Front panel options COM, USB, IEEE 1394 (FireWire). Option on board PATA hard disk drive 2.5-inch CCH-MARIACHI: Front panel options secondary DVI-D, COM, USB, audio in (analog), audio out (analog), digital audio. Option on board PATA hard disk drive 2.5-inch, option TPM 1.2 CCI-RAP: Front panel options secondary DVI-D, Wireless (Antenna), IEEE 1394 (FireWire), COM. Two PCI Express Mini Card sockets (WLAN, GSM, Wimax, Intel® Turbo Memory), on board socket for USB Flash disk. Option on board mezzanine storage module C20 provides up to 2 SATA hard disk drives 2.5-inch (RAID capable), option TPM 1.2 CCJ-RHYTHM: Front panel options DVI-D, COM, USB, IEEE 1394 (FireWire). CompactPCI Express system slot controller function by on board 6-port 24-lane PCIe switch. Option on board PATA hard disk drive 2.5-inch, option TPM 1.2 CCK-MARIMBA: PMC/XMC module carrier. Option on board mezzanine storage module C20-SATA CCL-CAPELLA: 4 x Gigabit Ethernet, IEEE 1394 (FireWire), option on board mezzanine storage module C20-SATA C10-CFA CompactFlash adapter module C15-DON on-board USB stick module (USB Flash disk) C23-SATA PCIe to SATA controller, USB SSD, COM ports C30-PATA 1.8-inch HDD/SSD module
J2/P2 Rear I/O	3 x Serial ATA (SATA), 2 x system internal SATA connectors, 1 x external eSATA connector 1 x Gbit Ethernet (switched by BIOS between front panel I/O and rear I/O) 3 x USB VGA Analog Video (switched by BIOS between front panel I/O and rear I/O) Keyboard, Mouse COM port (TTL Level) Suitable rear I/O transition module CCT-RIO available
CompactPCI®	ICH8M-E integrated 32-bit PCI bridge, 133MBps CPCI master, additional PCI arbiter in PLD for fully figured 8-slot CompactPCI backplane
CompactPCI® Express	CCG-RUMBA works also as CompactPCI Express System Board (system slot controller) by optionally available mezzanine expansion card (side board) CCJ-RHYTHM CPCIe 4-Link configuration (4-lanes each), for up to 4 CPCI peripheral slots type 1 and/or type 2 on a passive CPCIe backplane Suitable also for hybrid CPCI/CPCIe systems/backplanes (e.g. Schroff)
Platform Management	AMT 2.0 Intel® Active Management Technology (iAMT) ARM core based Manageability Engine (ME) in the GMCH Independent manageability firmware, stored in SPI Flash
Secure Computing	Option Trusted Platform Module TPM 1.2 according to Trusted Computing Group specifications, available on several mezzanine boards such as CCH/CCI/CCJ Crypto engine silicon brands Infineon or Atmel at users choice
BIOS	Phoenix BIOS with EKF enhancements for embedded systems SPI Flash memory 2 x 16/32/64 Mb Updates available from website ekf.com
Drivers	Intel® graphics driver Intel® networking driver Intel® Matrix Storage Manager software Intel® Turbo Memory driver
Thermal Conditions Environmental Conditions	Operating temperature: 0°C ... +70°C (CPU dependent) Storage temperature: -40°C ... +85°C, max. gradient 5°C/min Humidity 5% ... 95% non condensing Altitude -300m ... +3000m Shock 15g 0.33ms, 6g 6ms Vibration 1g 5-2000Hz
EC Regulations	EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1) 2002/95/EC (RoHS)
MTBF	tbd
Typical Power Requirements	Board	+3.3V +0.17V/-0.1V		+5V +0.25V/-0.15V
		MaxPower LFM/HFM ¹	WinXP Idle LFM/HFM¹	MaxPower LFM/HFM ¹	WinXP Idle LFM/HFM ¹
	CCG-1-RUMBA	tbd	tbd	tbd	tbd
	CCG-4-RUMBA	tbd	tbd	tbd	tbd
	CCG-8-RUMBA	tbd	tbd	tbd	tbd
Typical Performance Rating Measured with PCMark2005 under Windows XP, 2 x 1GB DDR2 667	Board	Processor		CPU/MEM Score
	CCG-1-RUMBA	U7500		tbd
	CCG-4-RUMBA	L7500		tbd
	CCG-8-RUMBA	T7500		tbd

¹Intel SpeedStep® Frequency Modes. LFM: Low Frequency Mode, HFM: High Frequency Mode

Items are subject to changes

Available as a rear I/O expansion board to the CCG-RUMBA CPU card, the CCT-RIO is provided with several I/O port connectors, to be used either in addition to the CCG-RUMBA front panel connectors or alternatively. Being mainly a passive rear I/O transition module, groups of signals from the CCG-RUMBA CPU board are passed across the CompactPCI J2/P2 connector to the CCT-RIO. Some of the data lines are available locally on the CCT board for system internal wiring only, while other connectors such as VGA-Video and Gigabit Ethernet are mounted into the back panel for external use. USB and SATA (eSATA) channels are provided both on-board and externally.

Typically the CCT-RIO ist equipped with a 4-HP rear panel (20.3mm width). As a custom specific option, an 8-HP panel is available with additional connectors.

Utilization of the CCT-RIO transition module adds a level of I/O functionality that is not available with the CCG-RUMBA CPU board alone. Further on, swapping the CPU card is simplified by means of rear I/O, which is important for efficient system maintenance (MTTR). Be sure to have ordered a CCG-RUMBA rear I/O capable version and also the CPCI backplane suitable for rear I/O in order to use the CCT-RIO transition module.

CCT-RIO

CCT-RIO Block Diagram

CCT-RIO Component Assembly (Top View)

Ordering Information CCG-RUMBA
Alias	Ordering No.	Short Description
RUMBA	CCG-1RD-RUMBA	3U/4HP, Core™ 2 Duo U7500 1.06GHz FSB 533MHz 2MB L2 cache, dual socket DDR2 SO-DIMM up to 4GB, DVI-I dual screen, dual GB-ETH, 7 x USB, 1 x PATA, 3 x SATA-2, 4 x PCIe, CF card slot, suitable for rear I/O across J2 • targeted for low power applications
	CCG-2RD-RUMBA	Similar to CCG-1, Core™ 2 Duo U7600 1.2GHz FSB 533MHz 2MB L2 cache • targeted for low power applications
	CCG-4RD-RUMBA	Similar to CCG-1, Core™ 2 Duo L7500 1.6GHz FSB 800MHz 4MB L2 cache • targeted for general purpose applications
	CCG-8RD-RUMBA	Similar to CCG-1, Core™ 2 Duo T7500 2.2GHz FSB 800MHz 4MB L2 cache • targeted for high performance applications
PUNK	CCE-1-PUNK	3U/4HP Mezzanine expansion board for CCG-RUMBA, 2 x 1394a FireWire, 2 x USB2.0, 2 x RS-232, option on-board hard disk
MARIACHI	CCH-1-MARIACHI	3U/4HP Mezzanine expansion board for CCG-RUMBA, HD audio codec (Azalia), option TPM 1.2, DVI-D digital video, analog audio, RS-232 (COM), w/o USB, option on-board hard disk
	CCH-2-MARIACHI	Similar to CCH-1, 2 x COM, USB, analog audio, w/o DVI-D
	CCH-3-MARIACHI	Similar to CCH-1, DVI-D, analog audio, digital audio, w/o USB & COM
	CCH-4-MARIACHI	Similar to CCH-1, COM, USB, analog audio, digital audio, w/o DVI-D
RAP	CCI-RAP	3U/4HP Mezzanine expansion board for CCG-RUMBA, 2 x PCI Express Mini Card sockets (e.g. WLAN, GSM, Robson Turbo Memory), USB Flash Disk option, DVI-D, 2 x FireWire, on-board SATA hard disk option (1 or 2 drives), option TPM 1.2
RHYTHM	CCJ-1-RHYTHM	3U/4HP Mezzanine expansion board for CCG-RUMBA, System Slot side board for CompactPCI Express backplanes, 24-port PCI Express packet switch, DVI-D, 1 x USB, 2 x FireWire, 1 x RS-232 (COM), on-board hard disk option, option TPM 1.2
RHYTHM	CCJ-2-RHYTHM	Similar to CCJ-1, 2 x COM, 1 x USB, 2 x FireWire, w/o DVI-D
MARIMBA	CCK-MARIMBA	3U/4HP Mezzanine expansion board for CCG-RUMBA, PMC/XMC module socket
CAPELLA	CCL-CAPELLA	3U/4HP Mezzanine expansion board for CCG-RUMBA, quad Gigabit Ethernet, USB Flash Disk option, FireWire, on-board SATA hard disk option (1 or 2 drives), option TPM 1.2
RIO	CCT-1-RIO	Rear I/O transition module for CCG-RUMBA with SATA connectors

CCG-*R*-RUMBA: suitable for rear I/O across J2
CCG-*X*-RUMBA: suitable for 64-bit CPCI J2/P2 backplane
CCG-**D-RUMBA: DVI-I video connector
CCG-**V-RUMBA: VGA video connector

C10-CFA CompactFlash Adapter for CCG-RUMBA (Included with CCG-RUMBA, w/o CF-Card)

Option C30-PATA 1.8-Inch HDD/SSD Module

CCG-RUMBA with CCJ-RHYTHM CPCI Express System Controller

EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail